How to Building a Papier-Mâché Dino, How Crochet A Blanket

How to Building a Papier-Mâché Dino.

With the right supplies and a bit of time, you can make your very own paper dinosaur that stands or moves. If you'd like a bigger craft project, you could even attempt a paper mache dinosaur or an origami dinosaur! Depending on the colors that you use, you can make your dinosaur look realistic or cartoonish.

Steps.
1. Blow up a balloon, tear newspaper into strips, and make a papier-mâché paste. Blow up a balloon to your desired size. Next, tear some newspaper into narrow strips, about 1 by 3 in (2.5 by 7.6 cm). Lastly, prepare your preferred papier-mâché glue or paste.

The most popular papier-mâché paste is just 1 part water and 1 part PVA glue (white school glue).

Start with just 1 or 2 sheets of newspaper; you can always make more strips.

Don't cut the strips, or the edges will be too sharp and create creases. Tearing them will give you a smoother finish.

2. Dip the strips into the paste, then apply them to the balloon. Run each strip of newspaper between your fingers after dipping it in the paste; this will remove any excess glue. Make sure that the strips are all going in the same direction as you apply them.

Overlap the strips a little, such as by 1⁄4 to 1⁄2 in (0.64 to 1.27 cm).

Keep the balloon in a cup or bowl so that it doesn't roll around. You may have to let 1 side of the balloon dry first before doing the other.

Leave a coin-sized space at one end of the balloon exposed so that you can pop the balloon later.

3. Apply 2 more layers of papier-mâché. You probably don't need to use the glue for the second layer; the wet strips already adhered to the balloon should be enough for the new ones to stick to. If the balloon starts to get too soggy, however, let it dry a bit, then continue working.

Consider using white tissue paper for as a fourth and final layer. This will give you a smoother base and help the paint show up better.

If you choose to use tissue paper, then make sure that you tear it into 3 by 1 in (7.6 by 2.5 cm) strips as well.

4. Let the strips dry overnight, then pop and remove the balloon. You may have to wait even longer than that, depending on how dry or humid it is in your home. In fact, it would be a good idea to poke your finger under the papier-mâché; if it feels wet, give it a little more time.

This completes your dinosaur's body.

Don't worry about the hole left by the balloon. You'll end up covering it with the dinosaur's head or tail.

5. Tape paper towel roll segments to the balloon for legs. Turn the papier-mâché balloon on its side, then use masking tape to secure the legs to the bottom.

Don't use clear tape; it won't stick to the papier-mâché.

You can also just cut 2 empty toilet paper rolls in half and use those instead.

6. Use cardboard, paper towel tubes, and foil to make the other limbs. Scrunch up aluminum foil into a ball to make a head, and then use aluminum foil shaped into a cone for the tail. The size and shape for each depends on what type of dinosaur that you're making, so look at some reference pictures. Here are some more ideas to get you started.

Triceratops: cut a round, scalloped shape out of cardboard for the fan. Use foil to make the horns.

Stegosaurus: cut triangles out of cardboard for the fins.

Apatosaurus/brontosaurus: use a paper towel tube to make the neck.

7. Tape the pieces to the body with masking tape. Take 1 of your pieces, and hold it against the balloon where you want it to go. Secure it with strips of masking tape until the seam is completely hidden. Again, don't use clear tape, because it won't hold.

Triceratops: tape the fan to the balloon first, then add the head (you may have to use hot glue to secure it). Finish by sticking the horns to the head.

Stegosaurus: tape or hot glue the head to 1 side of the body and the tail to the other. Use strips of tape to add the fins down the back and tail.

Apatosaurus/brontosaurus: tape the head to the long neck first, then tape the head to the body. Add the tail to the other side of the body.

8. Cover the pieces and the seams with more papier-mâché. Start by applying strips of papier-mâché to the seams. After that, cover the shapes themselves. If the pieces feel unstable, add more papier-mâché to the seams.

You may have to tear more strips of newspaper and prepare more papier-mâché paste for this.

Consider making some smaller strips for sharp curves and tight corners.

If the hole from when you removed the balloon is still visible, cover it up with more papier-mâché.

9. Wait for everything to dry. How long it will take for your project to dry really depends on what the weather is like. Papier-mâché will dry a lot faster on a hot, dry, sunny day than on a cold, wet, day. Be patient!

10. Paint the dinosaur as desired, then let the paint dry. Acrylic craft paint will work just fine for this, but you can use poster paint too. You can use realistic colors for your dinosaur, like gray, brown, and green, or you can use fantasy colors, like pink, purple, and blue.

For a nicer finish, paint the dinosaur white first, then let the paint dry. This will give you a clean "canvas" to work on.

Don't forget to add eyes and a mouth. You can paint the eyes, or glue googly eyes on instead.

How long it will take for the paint to dry will depend on what type of paint you're using. Plan to wait about 15 to 20 minutes, however.

Tips.

Your dinosaur doesn't have to look realistic at all. You can even make it pink and blue!

Look up pictures of cartoon dinosaurs. They have simpler shapes, which are easier to copy to your paper.

Things You'll Need.

White school glue, Newspaper, Balloon, Cardboard, Aluminum foil, Empty toilet paper rolls, Masking tape, Acrylic paint or poster paint, Scissors.